Machining Capabilities
CNC machining, sheet metal fabrication, casting and surface finishing — custom metal parts built to your drawings and shipped worldwide.
CNC Machining
3-axis and 4-axis machining centres for turned and milled parts, holding ±0.01 mm on critical dimensions. Aluminium, stainless steel, brass, carbon steel and engineering plastics.
- CNC turning, milling & drilling
- 3-axis and 4-axis machining centres
- Tolerances down to ±0.01 mm
- Aluminium, stainless steel, brass, carbon steel
- Prototype (1 pc) to volume production
CNC Machining
3-axis and 4-axis machining centres for turned and milled parts, holding ±0.01 mm on critical dimensions. Aluminium, stainless steel, brass, carbon steel and engineering plastics.
Precision Machining & Fabrication
Skilled machinists, welding and assembly for custom metal parts, brackets, frames and machined components built to your drawings.
- Manual turning, milling & drilling
- MIG / TIG / spot welding
- Custom brackets, frames & fixtures
- Sub-assembly & kitting
- Drawing-based one-off production
Precision Machining & Fabrication
Skilled machinists, welding and assembly for custom metal parts, brackets, frames and machined components built to your drawings.
Sheet Metal Fabrication
Cutting, forming and fabrication of sheet metal parts — enclosures, panels, housings and cladding in steel, aluminium and stainless steel.
- Laser cutting & shearing
- Press brake bending & forming
- Sheet metal enclosures & panels
- Stainless steel, aluminium, carbon steel
- Punching, notching & deburring
Sheet Metal Fabrication
Cutting, forming and fabrication of sheet metal parts — enclosures, panels, housings and cladding in steel, aluminium and stainless steel.
Casting & Moulded Components
Sand casting, die casting and investment casting for housings, brackets, covers and machine base parts, supplied raw or fully machined.
- Sand casting, die casting & investment casting
- Aluminium, zinc, brass & cast iron
- Housings, brackets, covers & base plates
- Pattern & mould development
- Cast-then-machined supply option
Casting & Moulded Components
Sand casting, die casting and investment casting for housings, brackets, covers and machine base parts, supplied raw or fully machined.
Surface Finishing & Treatment
Anodising, powder coating, plating and treatment options for corrosion resistance, wear resistance and a clean finished appearance.
- Anodising (clear, black, colour)
- Powder coating & wet painting
- Zinc / nickel plating
- Heat treatment & hardening
- Passivation, polishing & brushing
Surface Finishing & Treatment
Anodising, powder coating, plating and treatment options for corrosion resistance, wear resistance and a clean finished appearance.
Quality Control & Inspection
Dimensional inspection and documentation on every batch, with third-party reports available on request before shipment.
- CMM & manual dimensional inspection
- First-article & batch inspection
- Material certificates & traceability
- Pre-shipment inspection reports
- ISO 9001 quality management
Quality Control & Inspection
Dimensional inspection and documentation on every batch, with third-party reports available on request before shipment.
Our Equipment
50+ machines across a 12,000 m² workshop — the equipment your parts will actually be made on.
| Equipment | Specification | Qty |
|---|---|---|
| CNC Vertical Machining Centres | 3-axis / 4-axis | 50+ |
| CNC Turning Centres | Ø 5 – 400 mm | 12 |
| Manual Lathes & Milling Machines | Conventional | 10 |
| Fiber Laser Cutting Machine | 3,000 × 1,500 mm bed | 2 |
| CNC Press Brake | Up to 200 T | 4 |
| MIG / TIG Welding Stations | Steel, aluminium | 8 |
| CMM Inspection Machine | 0.001 mm resolution | 1 |
| Surface Treatment Line | Anodising / powder coat | 1 |
Equipment list shown for reference. Full capacity details available on request.
From Drawing to Delivery
A straightforward four-step process — no middlemen, no surprises.
Send Your Drawing
Share your 2D drawings or 3D files (STEP / IGES / DWG / PDF) with material, tolerance and surface finish requirements.
Quote & DFM Feedback
Engineering review of your drawing with cost-saving suggestions. Quotation and lead time sent within 24h.
Sample & Production
Sample or first-article part for your approval, then serial production with in-process inspection on every batch.
Inspection & Shipping
Final inspection report, protective packing for sea or air freight, and shipment booked to your port or forwarder.
Send Your Drawing, Get a Quote
Tell us the material, tolerance and quantity — our engineers reply with pricing and lead time within 24h.